Ozone meters and controllers

> Ozone meters and controllers
Ozone meters and controllers There are 20 products.

Subcategories

  • Ozone mirrors in water
    Ozone mirrors in water

    The measurement of ozone dissolved in water is carried out by means of devices measuring water directly flowing through the measuring system or gas evaporated from water.

  • Manual ozone meters
    Manual ozone meters

    Hand-held ozone meters are used to measure the ozone concentration in the air.

  • Parts, accessories, service.
    Parts, accessories,...
  • Air ozone concentration controllers
    Air ozone...

    Ozone concentration controllers are measuring devices with the ability to set the ozone concentration range for switching on and off the ozone generator or other signal receiver.

  • Multigas handheld meter calibration service Calibration consists in adjusting the meter parameters according to the 1ppm standard The price includes sending the meter after calibration to the customer.

  • Calibration service for the OS-4, OS-6 handheld meter Calibration consists in adjusting the meter parameters according to the 1ppm standard The price includes sending the meter after calibration to the customer.

  • 20ppm SM-EC sensor for OS-6 and OS-4 controller / controller The sensor with the board is a pre-calibrated set.   Goods available on request.   Waiting time around 21 days

  • A simple, inexpensive ozone monitor For monitoring ozone concentration near small ozone generators. Perfect for low-budget, uncomplicated applications such as measuring ozone concentration in bars, restaurants, photocopying points, water bottling, decontamination, research projects, lighting production, swimming pools and any other in which ozone can be...

  • SM-EC is an electrochemical ozone sensor module for use with our digital ozone controller OS-4 or OS-6 or as a stand-alone module using the RS-232 output. This technology with Eco Sensors provides accurate level detection and resolution at a ppb level over a wide range (.02-20 ppm or 1-50 ppm). The sensor module is compensated by a temperature and...

  • Controller / ozone concentration controller: C-30ZX   It behaves like a thermostat, alerts you of concentration changes based on previously set values. Ozone concentration reading (in ppm) using a diode bargraph. Simple and inexpensive. The C-30ZX has a relay through which it can control an external device, e.g. ozone generator, alarm signaling device...

  • Goods available on request. Waiting time around 21 days

  • Multigas III Polish ozone meter Basic features: measurement of Ozone concentration 0-2ppm legible, multi-functional, graphic LCD display, battery voltage status indicator, recording of measurement data and events in the device's memory, calculation and registration of average values, signaling alarms and emergency conditions of the device,...

  • Multigas III Polish ozone meter Basic features: measurement of Ozone concentration 0-10ppm legible, multi-functional, graphic LCD display, battery voltage status indicator, recording of measurement data and events in the device's memory, calculation and registration of average values, signaling alarms and emergency conditions of the device,...

  • Controller / ozone concentration controller: OS-4 0.03-20ppm It behaves like a thermostat controlling ozone generators and alerts you to concentration changes based on previously set values. Ozone concentration reading (in ppm) using a digital meter. Goods on order. Waiting time 21 days

  • Multigas III Polish ozone meter Basic features: measurement of Ozone concentration 0-100ppm legible, multi-functional, graphic LCD display, battery voltage status indicator, recording of measurement data and events in the device's memory, calculation and registration of average values, signaling alarms and emergency conditions of the device,...

  • OS-6 ozone concentration meter / controller 0-20ppm   Goods available on request. Waiting time around 21 days

  • OS-6 ozone concentration meter / controller 0.8-50ppm It is a controller with the highest measuring range in the world. It will be used in the fruit and vegetable processing industry, technological processes and everywhere where high ozone concentration is used. Goods available on request. Waiting time around 21 days

  • B-12 ozone meter 0-100ppm B12 series transducers are devices powered from a current loop that transmit a 4-20mA signal that is linearly proportional to the gas concentration. Powered by a 24 VDC power source, these transducers are able to withstand a load of 675 ohms, which is sufficient for most monitoring applications.

  • The Q46H / 64 monitors use a membrane polarographic sensor to accurately measure ozone in water. The sensor works like a battery, generating a current that is linearly proportional to the concentration of chlorine dioxide in the solution. The ozone permeable membrane isolates the sensor from the measured sample and ensures that the measurement is free of...

  • CHLORTROL + MICRO2CHEM MEASUREMENT OF CONTENT ABOUT 3 WATER Two O3 measurement channels DESTINY The CHLORTROL measuring set is intended for continuous measurement of ozone content in pure water. Main areas of application: drinking water installations in water treatment plants (SUW) and water intakes, technological installations requiring monitoring...

  • The EcoSensors UV-100 model is an ozone analyzer for general measurement of ozone in the air. Its range is 01-999 ppm (v) with an accuracy of 2%, and includes a built-in data logger. The UV-100 weighs only 2.1 kg, it is powered by an external power supply or 12 V battery. The UV-100 analyzer is a versatile measuring device that will be used in the...

  • UV-106MH Is an ozone analyzer for general measurement of ozone in the air. Its range is 0-10,000 ppm (0-1 vol%) ppm with an accuracy of 2%, and includes a built-in data logger. The UV-106MH weighs only 2.1 kg, it is powered by an external power supply or 12 V battery. The UV-106MH analyzer is a versatile measuring device that will be used in the...

  • The UV-106-W meter is one of the most accurate and universal devices for measuring ozone in water. Product features: Application - Measurement of ozone concentration in clean and dirty water Ozone concentration range 0-100 ppm (g / m3, μg / mL) Accuracy Above 0.05 ppm or 1% of value Measurement frequency 10 s Response time 20 s Averaging times of...

  • Atom water 20 Water ozonation system Atom water 20 is a fully automatic device for the production of ozonated water. Thanks to its construction, it can be a mobile ozonation station at the plant's washing site or a stationary device for disinfecting water or producing water as a strong disinfectant in further technological processes. The device is...

Showing 1 - 20 of 20 items