ABSORBER 6057 ABE1 VAPOR GASES 3M

> >>ABSORBER 6057 ABE1 VAPOR GASES 3M
ABSORBER 6057 ABE1 VAPOR GASES 3M View larger

ABSORBER 6057 ABE1 VAPOR GASES 3M

New product

The 3M 6000 series absorbers are designed to be combined with 3M 6000 , 6500 and 7500 series half-masks and with the 3M 6000 series full face mask.

In accordance with EN14387, ABE1 filter absorbers are designed to protect against:
- organic gases and vapors with a boiling point above 65 ° C and an air volume concentration ≤0.1% (1,000 ppm)
- inorganic gases and vapors with an air volume concentration ≤0.1% (1,000 ppm)
- acid gases and vapors with an air volume concentration ≤0.1% (1,000 ppm).

Price per pack of 2 pcs included

More details

  • Replacement filters and absorbers for masks and respirators

    Letter symbols and color codes used to mark filters and absorbers depending on their purpose:

    Type

    Color of Marking

    Destiny

    P

    white

    liquid dusts and aerosols

    AND

    brown

    organic gases and vapors with a boiling point above 65 ° C

    AX

    brown

    organic gases and vapors with a boiling point below 65 ° C

    B

    Gray

    inorganic gases and vapors, except carbon monoxide, e.g. chlorine, hydrogen sulfide

    E

    yellow

    acid gases and vapors, e.g. sulfur dioxide

    K

    green

    ammonia and organic ammonia derivatives

    SX

    purple

    substances specified by the producer, so-called special absorber

    WELL

    blue

    nitrogen oxides

    hg

    red

    mercury vapors

    Division of gas absorbers

    All absorbing elements are further divided into three protection classes:

    • class 1 - absorbers of low sorption capacity, designed for protection against gases or vapors with a volume concentration in air not exceeding 0.1% (1000 ppm),

    • class 2 - absorbers of medium sorption capacity, designed for protection against gases or vapors with a volume concentration in air not exceeding 0.5% (5.000 ppm),

    • class 3 - absorbers with high sorption capacity, designed for protection against gases or vapors with a volumetric concentration in air up to 1% (10,000 ppm).

    Division of filters

    The filtration efficiency is determined against standard aerosols, i.e. sodium chloride and paraffin oil mist. Depending on the filtering efficiency, the filter elements are divided into three protection classes:

    • class 1 - (designation P1 ) - filtration efficiency 80% - used to protect against solid particles of low toxicity for which NDS≥2mg / m 3 ,

    • class 2 - (designation P2 ) - filtration efficiency 94% - used to protect against solid and liquid particles of low and medium toxicity for which NDS≥0.05mg / m 3 ,

    • class 3 - (designation P3 ) - filtration efficiency 99.95% - used to protect against solid and liquid particles of high toxicity for which NDS <0.05mg / m 3 .

    Example of designation: AB1P3 - this is a class 1 absorber for organic gases and vapors with a boiling point above 65 ° C (A) and inorganic gases and vapors (B) combined with a filter (P) class 3.